About this deal
High performance Diamond Grit Hole Saws are perfect for drilling holes in non-metallics and offer the ideal cutting solution for the toughest situations. Holes below this size can usually be achieved using a standard drill bit, while larger holes will generally require alternative cutting methods. We all know the way that down lights are installed we mark the light check for no joists and then we use a relevant sized hole saw to cut the hole. The Bosch range includes holes saw cutters for stainless steel, or hole cutter for wood, drywall, plastic, tile, and stone.
Hole Saws | Bosch Professional Accessories Hole Saws | Bosch Professional Accessories
Some of our EXPERT hole cutter tools also feature our patent slot design for better view and plug ejection. Our hole saw drill bit can be easily attached to impact drills and drivers to produce clean cuts through a range of surfaces like brick, wood, metal, tiles and plastics. These hole saws will produce clean, accurate cuts time and time again and offer extended product life well beyond that of conventional tools. The diamond-tipped edge is produced from a uniform coating of synthetic diamond grit bonded to a durable steel platform, which provides exceptional performance at high speeds and effective cutting action on brick, non-hardened glass, ceramic, tiles and stone.The Deep Cut saw features an increased depth of 51mm (2") and is ideal for cutting metal and tubes with a thickness of greater than 3mm, and wood up to 51mm (2") thick.
Holesaw Kit | Toolstation Downlight Holesaw Kit | Toolstation
The Carbide Tipped Deep Cut (CTD) Hole Saw is the perfect solution for repeated intensive drilling in mild and stainless steel, cast iron, aluminium and copper of all thicknesses up to and including 25mm (1”). Our Water Coolant Dispenser is small enough to fit into your pocket, but still large enough to contain sufficient water to cool a substantial number of diamond tile drill or hole saw cuts. Our hole saw cutters can be used with the Bosch Power Change Plus keyless arbor for enhanced accuracy and robustness when drilling.
A cost-effective solution for cutting through nail-embedded wood, or virtually any wood and metal combination, reinforced concrete, and fibreglass. More precise than twist or spade drill bits, hole saws can offer a neater finish and eliminate the need for more complex cutting work. Clarke's hole cutter set includes 6 popular sizes of bi-metal hole cutters plus a hex drive adaptor and pilot drill.